The AmbiFloat 20 system provides a flexible and effective form of heating within battened floor buildups and can be used in both existing and new build applications with minimal effect to the overall floor build up. It can also be easily adapted to suit sprung sports floors, acoustic batten floors and over-battened floors.Timber floor battens are fixed down to the subfloor in the normal way in preparation for the AmbiFloat panels to be installed in between.

The reflective properties of the aluminium foil face mean that any heat is efficiently pushed up through the sub-floor layers for maximum heat output. The nature of the system means that it has a quicker response that a traditional (screed) UFH system.

System Overview
  • Heat Output up to 80w/m2
  • Incorporates insulation layer
  • Can be used with existing floor constructions
  • ‘Dry’ system – no screed required
AmbiFloat 20 for Floating Floors System Datasheet
For more information on the AmbiFloat 20 for Floating Floors system, call 01707 649 118
Product Code Quantities Required Component Images
17mm UFH Pipe 41010 6 linnear metres per m2 of heated area
Manifold 41320 Depends on heated area - normally approx 1 port per 20m2 of heated area
Manifold Couplings 42200 For 17mm Ambiente pipe
Isolating Ball Valves 42050 1 pair (sold in pairs) per manifold
Manifold Tag 46755 1 per manifold
Pipe bends 41050 2 per port (used to form a neat bend in the pipe beneath the manifold)
Pumpset/blender unit 41434 1 per manifold
AmbiFloat 20 EPS100 board (50mm) 46044 Check drawings to calculate square meterage - 1.2m x 0.35m (0.42m2) sheets
50m aluminium foil tape 92004 1 roll per 25m2 heated area

Please note that the above quantities are only guides, and not intended to cover every situation. Factors such as the heat source, heat loss and other parameters will affect the quantities of some products required.

See the AmbiFloat 20 for Floating Floors system in action

Not sure which system would best suit your requirements? No problem, just fill in the basic details below, and one of our team will be in touch to discuss and reccomend the best solution.