Suitable for Battoned/acoustic floors
Fits within existing floor void
Pipe centres every 50 mm
Economic installation costs
AmbiVoid Underfloor Heating System Overview
- Heat Output Up to 60 W/m2
- Designed for new-build or refurbishment projects
- Void Heating system
This is a a variant of the AmbiClip system which relies on the heating of the air void to heat the space above it – due to this being the method of heating, the actual output of the system may be limited in some circumstances.
Insulation is laid between the battens (25 mm minimum) and cliprail sections are laid across the width of the void. Pipework is then run up and down the voids, clipping into the cliprail to keep it consistent.
This is a low-cost solution and is ideal in new-build situations where the insulation level is exceptional.
AmbiVoid Downloads and Ordering
AmbiVoid Specification
System Type Air Void
Sub Floor Solid + Suspended
Pipe size (mm) 17x2mm
Panel size (mm) N/A
Pipe Centres (mm) 150, 200, 250
Minimum Build up excluding floor finish 0mm if within existing joist gap
Based on 0 tog, 45 degree MWT and 20 degree room temp output (W/m2) 45
Weight (kg/m2) 0.9
Acoustic Improvement (dB) N/A
Dependant on pipe centres max m2 per loop 24
Heat Pump Ready No
What’s included in the AmbiVoid system
17 mm UFH Pipe
6 linear metres per m2 of heated area
Code 41010
Manifold
Depends on heated area – normally approx 1 port per 20 m2 of heated area
Code 41320
Manifold Couplings
For 17 mm Ambiente pipe
Code 42200
Isolating Ball Valves
1 pair (sold in pairs) per manifold
Code 42050
Manifold Tag
1 per manifold
Code 46755
Pumpset / Blender unit
1 per manifold
Code 41437
Pipe bends
2 per port (used to form a neat bend in the pipe beneath the manifold)
Code 41050
Border Edge Insulation
1 roll per 50 m2 of total floor area
Code 41620
Cliprails
1 cliprail per m2 of heated area
Code 41450
Cliprail Clips
Approx. 6 clips per m2 of heated area
Code 41505