Low profile build up
High output
Fully bonded system
Self-adhesive backing
AmbiSolo® Underfloor Heating System Overview
- Very quick response time, heating up in 15-25 minutes (depending on the floor covering).
- Exceptional heating output.
- The lowest profile system.
- Allows direct tiling onto the system.
- Consistent pipe spacing every 50 mm
- Super thin build-up, 12mm pipe with 16 mm profile
- Carpet/vinyl + 6 mm = 22 mm total thickness*
- Tiles/wood + 2 mm = 18 mm total thickness*
- Self-adhesive backing for speedy installation
The AmbiSolo® system is a low-profile castellated underfloor heating system, designed for refurbishment projects where floor buildup is at a premium. The system incorporates a 12 mm Ambiente underfloor heating pipe within a 16 mm plastic castellated panel, which is then covered with 18 – 22 mm of AmbiLevelling fibre-reinforced levelling compound.
The way that this system is designed means that it must be laid directly onto a structural and level subfloor, not onto any loose flooring or insulation layer. This can be a concrete subfloor or chipboard floor, but it must be a structural layer as the 18 – 22 mm compound is not structural in its own right.
*Using AmbiLevelling Pro screed products
Part of our range of Low Profile Underfloor Heating.
AmbiSolo® Downloads and Ordering
AmbiSolo® Specification
System Type Low Profile
Floor Type Concrete sub-floor or Chipboard floor
Pipe Size 12mm
Panel Coverage 0.6 m2
Pipe Centres 150mm
Minimum System Buildup 20mm (see description above)
Based on 0 tog, 45 degree MWT and 20 degree room temp output (W/m2) 86
Weight (kg/m2) 32
Acoustic Improvement (dB) N/A
Max m2 per loop 13 (or 100 linear meters)
Heat Pump Ready Yes
What’s included in the AmbiSolo® system
AmbiSolo® Panel (self-adhesive)
1.7 panels per m2 of total area
Code 46100
12 mm UFH Pipe
8 linear metres of pipe per m2 of heated area
Code 39000
Manifold
Depends on heated area – normally approx. 1 port per 13 m2 of heated area
Code 41320
Manifold Couplings
For 12 mm Ambiente pipe
Code 42189
Isolating Ball Valves
1 pair (sold in pairs) per manifold
Code 42050
Manifold Tag
1 per manifold
Code 46755
Pumpset/blender unit
1 per manifold
Code 41437
Pipe bends
2 per port (used to form a neat bend in the pipe beneath the manifold)
Code 41050
Border Edge Insulation
1 roll per 50 m2 of total floor area
Code 41620