AmbiStructural

The AmbiStructural system is used where UFH is required to be incorporated into a structural floor build up. Typical scenarios are airport hangers, car show rooms, where point loading can be extremely high.

For Suspended Floors line

The AmbiStructural system is used where UFH is required to be incorporated into a structural floor build up. Typical scenarios are airport hangers, car show rooms, where point loading can be extremely high.

  • Heat Output Up to 100w/m2
  • Designed for new-build solid floors
  • Flexible pipe layout
  • Quick and efficient installation
  • Incorporates structural flooring mesh
Download Spec Sheet
Component Product Code Quantities Required
17mm UFH Pipe Code 41010 6 linnear metres per m2 of heated area
Manifold Code 41320 Depends on heated area - normally approx 1 port per 20m2 of heated area
Manifold Couplings Code 42200 For 17mm Ambiente pipe
Isolating Ball Valves Code 42050 1 pair (sold in pairs) per manifold
Manifold Tag Code 46755 1 per manifold
Pumpset/blender unit Code 41437 1 per manifold
Pipe bends Code 41050 2 per port (used to form a neat bend in the pipe beneath the manifold)
Zip ties Code 46750 Approx. 15 ties per m2 of heated area

The AmbiStructural system is used where UFH is required to be incorporated into a structural floor build up. Typical scenarios are airport hangers, car show rooms, where point loading can be extremely high. High desnsity flooring insulation panels of the required specification are laid over the complete floor area which is overlaid with an A142 reinforcing mesh onto which the underfloor heating pipework is clipped or tied.

Pipework should be laid as per the designs supplied, with all pipework loops converging at the central manifold. This form of heating can also be used for driveway heating and other external applications. In these situations it is critical that the system is dosed with an anti-freeze mix to prevent damage to pipework in cold weather.