Suitable for joisted floors
50mm insulation
Dry floor build up
Aluminium foil layer to spread the heat
AmbiFloat 30 Underfloor Heating System Overview
The AmbiFloat 30 system is designed specifically for joisted floor constructions and provides a stable and effective form of heating. Similar to the AmbiPlate 30 system, the AmbiFloat 30 system incorporates the aluminium profile and insulation into one product. The insulation panels are made from high density insulation to provide increased strength and are available in various thicknesses starting from 50mm.
Before the insulation panels can be installed, timber battens should be fixed to the sides of the joists at the required depth to support the insulation. The insulation panels are overlaid with aluminum foil to provide an equal distribution of heat and are grooved for the underfloor heating pipework to sit within. The pipework is installed in continuous loops within the floor back to the manifold in the normal fashion.
The reflective properties of the aluminium foil face mean that any heat is efficiently pushed up through the subfloor layers for maximum heat output. The nature of the system means that it has a quicker response that a traditional (screed) UFH system.
AmbiFloat 30 Downloads and Ordering
AmbiFloat 30 Specification
System Type Floating Floor
Sub Floor Solid + Suspended
Pipe size (mm) 17x2mm
Panel size (mm) 1200mm x 350mm – 0.42m2
Pipe Centres (mm) 200
Minimum build up excluding floor finish 50mm
Weight (kg/m2) 2.3
Acoustic Improvement (dB) N/A
Maximum m2 per loop 20m2 or 120 m of pipe
Heat Pump Ready No
What’s included in the AmbiFloat 30 system
17 mm UFH Pipe
6 linear metres per m2 of heated area
Code 41010
Manifold
Depends on heated area – normally approx 1 port per 20 m2 of heated area
Code 41320
Manifold Couplings
For 17 mm Ambiente pipe
Code 42200
Isolating Ball Valves
1 pair (sold in pairs) per manifold
Code 42050
Manifold Tag
1 per manifold
Code 46755
Pumpset / Blender unit
1 per manifold
Code 41437
Pipe bends
2 per port (used to form a neat bend in the pipe beneath the manifold)
Code 41050
AmbiFloat EPS100 board (25 mm / 50 mm)
Check drawings to calculate square meterage
Code (46000 / 46040 / 46044)
50 m aluminium foil tape
1 roll per 25 m2 heated area
Code 92004