AmbiDeck 18

The AmbiDeck 18 system really does give the best of both worlds – it provides a low-profile underfloor heating system, which incorporates an insulation layer and can be tiled directly onto. AmbiDeck 18 consists of a high-density XPS insulation panel, 18mm thick.

 

For LOW-PROFILE SYSTEM line

The AmbiDeck 18 system really does give the best of both worlds – it provides a low-profile underfloor heating system, which incorporates an insulation layer and can be tiled directly onto. AmbiDeck 18 consists of a high-density XPS insulation panel, 18mm thick.

 

  • Structural floor layer
  • Quick and efficient installation
  • AmbiDeck fixing washer
  • Insulation layer
Download Spec Sheet
Component Product Code Quantities Required
12mm UFH Pipe Code 39000 8 linear metres per m2 of heated area
Manifold Code 41320 Depends on heated area - normally approx. 1 port per 13m2 of heated area
Manifold Couplings Code 42189 For 12mm Ambiente pipe
Isolating Ball Valves Code 42050 1 pair (sold in pairs) per manifold
Manifold Tag Code 46755 1 per manifold
Pumpset/blender unit Code 41437 1 per manifold
Pipe bends Code 41060 2 per port (used to form a neat bend in the pipe beneath the manifold)
Nail-in pipe clips Code 41490 1 bag per 50m2 heated area
AmbiLowBoard 18mm Code 46060 Check drawings to calculate square meterage - 1.2m x 0.6m sheets
50m aluminium foil tape Code 92004 1 roll per 25m2 heated area
AmbiDeck Panels Code 46160 1.2 x 0.6m - 18mm thick
AmbiDeck Screws Code 46192 One box per 30m2
AmbiDeck Washers Code 46195 One bag per 15m2

The AmbiDeck 18 system really does give the best of both worlds – it provides a low-profile underfloor heating system, which incorporates an insulation layer and can be tiled directly onto. AmbiDeck 18 consists of a high-density XPS insulation panel, 18mm thick.

The face of the panel is cement-coated, making it rigid and durable. It is grooved to take 12mm UFH pipework, with a radius return grooved into each panel, making the panel universal. Additional pipework channels can easily be routed/ grooved into the panel.

AmbiDeck 18 must be laid onto a flat and level subfloor, which can either be concrete or timber based. Over a concrete floor, we recommend laying the AmbiDeck 18 panels over a combed layer of flexible tiling adhesive. Over a timber floor, we recommend securing the panels down with screws, using the AmbiDeck washers. Tiles and wood flooring can be laid directly over this system. Other finishes such as carpets or vinyl will require an intermediate board layer, prior to the finish being installed.