AmbiChipBoard

The AmbiChipboard system is a unique combination of a structural floor solution, while incorporating underfloor heating.

For Suspended Floors line

The AmbiChipboard system is a unique combination of a structural floor solution, while incorporating underfloor heating.

  • Heat Output up to 60w/m2
  • Unique structural floor system incorporating UFH
  • Universal panel grooved for 12mm pipework
  • Some floor finishes can be laid directly on top
  • No impact on floor build-up
Download Spec Sheet
Component Product Code Quantities Required
12mm UFH Pipe Code 39000 8 linear metres per m2 of heated area
Manifold Code 41320 Depends on heated area - normally approx. 1 port per 12m2 of heated area
Manifold Couplings Code 42189 For 12mm Ambiente pipe
Isolating Ball Valves Code 42050 1 pair (sold in pairs) per manifold
Manifold Tag Code 46755 1 per manifold
Pumpset/blender unit Code 41437 1 per manifold
Pipe bends Code 41060 2 per port (used to form a neat bend in the pipe beneath the manifold)
AmbiChipBoard 22mm (with returns) Code 46685 Check drawings to calculate square meterage - 2.4m x 0.6m sheets

The AmbiChipboard system is a unique combination of a structural floor solution, while incorporating underfloor heating. It consists of high grade moisture-resistant tongue/grooved chipboard panels, that are pre-routered to take 12mm UFH pipework. Pipework channels are routed typically at 150mm spacings, with radius returns and transit channels to facilitate installation. Often the tail/transit pipework is run beneath the floor in the joist void to minimise the need for any further routing of the boards. AmbiChipboard conforms to BS EN1991-1-2202 for domestic deck categories A1, A2 and A3. Ambiente specify the use of a 6mm plywood (or cement-based alternative) to be laid over the system before laying the floor finish as follows:

 

JOIST SPACING PLY THICKNESS
400mm Space Joists 6mm Ply
600mm Space Joists 9mm Ply