AmbiScreedboard is a grooved cement board system, part of our low-profile range, ideal for retro-fit scenarios. This system is designed for hard floor finishes such as tiles and wood flooring, which can be laid directly on top of the installed system. The boards are supplied in two pre-routered panels – straight boards and return panels, depending on the configuration of
the pipework pattern. The cementitious nature of the board gives it a low thermal resistance, which allows for a good and even spread of heat through the floor. The AmbiScreedboard system must be laid on a flat, level and solid base, in order to give a consistent surface on which to lay floor coverings. Note that floor finishes such as carpet and vinyl cannot be laid directly onto this system for point-loading reasons – in this scenario an additional layer (normally a 6mm plywood) needs to be laid over the system before the floor finish is laid. We recommend bonding it down, rather than mechanically fixing, to avoid damage to the pipework.

System Overview
  • Heat Output up to 80w/m2
  • Low Profile System for retro-fit projects
  • Straight/Return panels for multiple pipe configurations
  • Some floor finishes can be laid directly on top
AmbiScreedBoard System Datasheet
For more information on the AmbiScreedBoard system, call 01707 649 118
Product Code Quantities Required Component Images
12mm UFH Pipe 39000 8 linear metres of pipe per m2 of heated area
Manifold 41320 Depends on heated area - normally approx. 1 port per 13m2 of heated area
Manifold Couplings 42189 For 12mm Ambiente pipe
Isolating Ball Valves 42050 1 pair (sold in pairs) per manifold
Manifold Tag 46755 1 per manifold
Pipe bends 41060 2 per port (used to form a neat bend in the pipe beneath the manifold)
Pumpset/blender unit 41434 1 per manifold
AmbiScreedBoard 18mm (straight) 46670 Check drawings to calculate square meterage - 1.2m x 0.6m sheets
AmbiScreed Board 18mm (return) 46672 Check drawings to calculate square meterage - 1.2m x 0.6m sheets
AmbiScreedBoard joint adhesive 46666 Allow one bottle per 13m2
AmbiScreedBoard screws 46667 Allow one box per 50m2
AmbiPrime 77 47200 1ltr per 20m2 of boarded area

Please note that the above quantities are only guides, and not intended to cover every situation. Factors such as the heat source, heat loss and other parameters will affect the quantities of some products required.

See the AmbiScreedBoard system in action

Not sure which system would best suit your requirements? No problem, just fill in the basic details below, and one of our team will be in touch to discuss and reccomend the best solution.