< Go Back

AmbiClip (Biscuit Screed) Screeded Floors

Biscuit screed system provides an economical means of incorporating UFH into a property, while also offering excellent overall heat output.

This system can be used on ground or upper floors, and involves laying a thin layer of screed over UFH pipework clipped to insulation, between battens.  It is only possible to get away with such a thin screed layer (as little as 25mm) as it is not forming a structural slab – just used to fill in between the battens/joists.

The only disadvantage of this system is that it does introduce a ‘wet’ trade in the screed, which can especially be challenging on upper floors.

System Overview
  • Heat Output Up to 100w/m2
  • Designed for new-build or refurbishment projects
  • Output of traditional screed system from joisted/battened floors
AmbiClip (Biscuit Screed) Screeded Floors System Datasheet
For more information on the AmbiClip (Biscuit Screed) Screeded Floors system, call 01707 649 118
Product Code Quantities Required Component Images
17mm UFH Pipe 41010 6 linear metres per m2 of heated area
Manifold 41320 Depends on heated area - normally approx 1 port per 20m2 of heated area.
Manifold Couplings 42200 For 17mm Ambiente pipe
Isolating Ball Valves 42050 1 pair (sold in pairs) per manifold
Manifold Tag 46755 1 per manifold
Pipe bends 41050 2 per port (used to form a neat bend in the pipe beneath the manifold)
Pumpset/blender unit 41434 1 per manifold
Cliprails 41450 1 cliprail per m2 of heated area
Cliprail Clips 41505 Approx. 6 clips per m2 of heated area
Border Edge Insulation 41620 1 roll per 50m2 of total floor area

Please note that the above quantities are only guides, and not intended to cover every situation. Factors such as the heat source, heat loss and other parameters will affect the quantities of some products required.

See the AmbiClip (Biscuit Screed) Screeded Floors system in action
View Photos

Not sure which system would best suit your requirements? No problem, just fill in the basic details below, and one of our team will be in touch to discuss and reccomend the best solution.

*
*
*
*