The AmbiChipboard system is a unique combination of a structural floor solution, while incorporating underfloor heating. It consists of high grade moisture-resistant tongue/grooved chipboard panels, that are pre-routered to take 12mm UFH pipework. Pipework channels are routed typically at 150mm spacings, with radius returns and transit channels to facilitate installation. Often the tail/transit pipework is run beneath the floor in the joist void to minimise the need for any further routing of the boards. AmbiChipboard conforms to BS EN1991-1-2202 for domestic deck categories A1, A2 and A3.

Ambiente specify the use of a 6mm plywood (or cement-based alternative) to be laid over the system before laying the floor finish as follows:

JOIST SPACING PLY THICKNESS
400mm Space Joists 6mm Ply
600mm Space Joists 9mm Ply

 

System Overview
  • Heat Output up to 60w/m2
  • Unique structural floor system incorporating UFH
  • Universal panel grooved for 12mm pipework
  • Some floor finishes can be laid directly on top
  • No impact on floor build-up
AmbiChipBoard System Datasheet
For more information on the AmbiChipBoard system, call 01707 649 118
Product Code Quantities Required Component Images
12mm UFH Pipe 39000 8 linear metres per m2 of heated area
Manifold 41320 Depends on heated area - normally approx. 1 port per 12m2 of heated area
Manifold Couplings 42189 For 12mm Ambiente pipe
Isolating Ball Valves 42050 1 pair (sold in pairs) per manifold
Manifold Tag 46755 1 per manifold
Pipe bends 41060 2 per port (used to form a neat bend in the pipe beneath the manifold)
Pumpset/blender unit 41434 1 per manifold
AmbiChipBoard 22mm (with returns) 46685 Check drawings to calculate square meterage - 2.4m x 0.6m sheets

Please note that the above quantities are only guides, and not intended to cover every situation. Factors such as the heat source, heat loss and other parameters will affect the quantities of some products required.

See the AmbiChipBoard system in action

Not sure which system would best suit your requirements? No problem, just fill in the basic details below, and one of our team will be in touch to discuss and reccomend the best solution.

*
*
*
*