Ambiente was proud to supply its Underfloor Heating system throughout this luxury residence in this sought-after area of Hertfordshire.

On the ground floor, our AmbiClip system was used – consisting of UFH pipework clipped to an insulation layer, prior to the floor screed being laid.

Project Details

SYSTEM (Ground Floor) AmbiClip
SYSTEM (Upper Floors)

AmbiSolo

INSTALLATION DATE

September 2016

 

Normally on a joisted floor, the most common solution would be our AmbiPlate system, but this system does rely on regular joist spacing. The joists on this project were so irregular, that it made sense to install the chipboard structural deck, and then the UFH system over that. Our AmbiSolo system was installed on the first floor – consisting of a plastic panel stuck to the chipboard deck, incorporating 12mm UFH pipework. The whole system is then covered with 20mm of reinforced levelling latex, ready to take any floor finish. The Ambiente Neo control system was selected for controlling the underfloor heating, comprising 7-day programmable time and temperature settings across 4 time cycles, holiday mode, frost mode & many other user friendly and energy efficient functions. With the addition of the NeoHub unit, the control system is completely controllable via a smartphone

If you have a project that would benefit from an Ambiente underfloor heating system call 01707 649 118