AmbiTak
Screeded UFH
Speed of installation
Custom pipe spacings
Snail pipe pattern
Heat pump ready
AmbiTak Underfloor Heating System Overview
- Heat Output Up to 122 W/m2
- Designed for screeded solid floors
- Flexible pipe layout
- Quick and efficient installation
The AmbiTak is a quick and flexible system, providing an even and effective form of heating within a screeded floor build-up. UFH pipework is typically clipped to a laminated EPS sheet (25 mm minimum), which has a printed grid to help the installer achieve the correct pipe spacings. Tacked staples are fed from a specialist tool through the laminate layer and into the EPS insulation – the staples are barbed to give a good fixing that will withstand the flex of the pipe. We recommend that the screeding process is scheduled to follow shortly after installation to avoid leaving the system vulnerable to damage. If a liquid screed is used, the insulation must be sealed to provide a watertight base.
Part of our range of Underfloor Heating For Screeded Floors.
AmbiTak Downloads and Ordering
AmbiTak Specification
System Type Screeded
Sub Floor Solid
Pipe size (mm) 17 x 2 mm
Panel size (mm) N/A
Pipe Centres (mm) 100, 150, 200, 250
Minimum Build up excluding floor finish 75mm (25mm Insulation + 50mm Flow Screed)
Based on 0 tog, 45 degree MWT and 20 degree room temp output (W/m2) 122
Weight (kg/m2) 1.6 (water filled @ 150mm pipe centres)+ Insulation + Screed
Acoustic Improvement (dB) N/A
Max m2 per loop 24 at 250mm pipe centres (or 120 linear meters)
Heat Pump Ready Yes
What’s included in the AmbiTak system
Manifold Couplings
For 17 mm Ambiente pipe
Code 42200
Isolating Ball Valves
1 pair (sold in pairs) per manifold
Code 42050
Manifold Tag
1 per manifold
Code 46755
CircoMax 2 – Pumpset / Blender unit
1 per manifold
Code 41437
Pipe bends
2 per port (used to form a neat bend in the pipe beneath the manifold)
Code 41050
Border Edge Insulation
1 roll per 50 m2 of total floor area
Code 41621
Tacker Staples (40 mm / 60 mm)
1 box per loop of UFH pipe
Code 41530/41550
