Low profile build up

High Temperature Output Logo

High output

Fully bonded system

Self-adhesive backing

AmbiSolo® Underfloor Heating System Overview

  • Very quick response time, heating up in 15-25 minutes (depending on the floor covering).
  • Exceptional heating output.
  • The lowest profile system.
  • Allows direct tiling onto the system.
  • Consistent pipe spacing every 50 mm
  • Super thin build-up, 12mm pipe with 16 mm profile
  • Carpet/vinyl + 6 mm = 22 mm total thickness*
  • Tiles/wood + 2 mm = 18 mm total thickness*
  • Self-adhesive backing for speedy installation

The AmbiSolo® system is a low-profile castellated underfloor heating system, designed for refurbishment projects where floor buildup is at a premium. The system incorporates a 12 mm Ambiente underfloor heating pipe within a 16 mm plastic castellated panel, which is then covered with 18 – 22 mm of AmbiLevelling fibre-reinforced levelling compound.

The way that this system is designed means that it must be laid directly onto a structural and level subfloor, not onto any loose flooring or insulation layer. This can be a concrete subfloor or chipboard floor, but it must be a structural layer as the 18 – 22 mm compound is not structural in its own right.
*Using AmbiLevelling Pro screed products

AmbiSolo® Downloads and Ordering

Download icon

System Data Sheet

Download
Get a Quick Quote

Get a Quick Quote

Get a quote
Request a Sample

Request a Sample

Request Sample

AmbiSolo® Specification

System Type Low Profile

Floor Type Concrete sub-floor or Chipboard floor

Pipe Size 12mm

Panel Coverage 0.6 m2

Pipe Centres 150mm

Minimum System Buildup 20mm (see description above)

Based on 0 tog, 45 degree MWT and 20 degree room temp output (W/m2) 86

Weight (kg/m2) 32

Acoustic Improvement (dB) N/A

Max m2 per loop 13 (or 100 linear meters)

Heat Pump Ready Yes


What’s included in the AmbiSolo® system

AmbiSolo-Panel-(self-adhesive)

AmbiSolo® Panel (self-adhesive)
1.7 panels per m2 of total area
Code 46100

12mm-UFH-Pipe

12 mm UFH Pipe
8 linear metres of pipe per m2 of heated area
Code 39000

Manifold

Manifold
Depends on heated area – normally approx. 1 port per 13 m2 of heated area
Code 41320

Manifold-Couplings

Manifold Couplings
For 12 mm Ambiente pipe
Code 42189

Isolating-Ball-Valves

Isolating Ball Valves
1 pair (sold in pairs) per manifold
Code 42050

Manifold Tag

Manifold Tag
1 per manifold
Code 46755

Pumpset blender unit

Pumpset/blender unit
1 per manifold
Code 41437

Pipe-bends

Pipe bends
2 per port (used to form a neat bend in the pipe beneath the manifold)
Code 41050

Border-Edge-Insulation

Border Edge Insulation
1 roll per 50 m2 of total floor area
Code 41620