Speed of installation

50mm Pipe Centre

Pipe centres every 50 mm

Snail Pipe Pattern Symbol

Snail pipe pattern

Heat Pump Ready Fan Orange Symbol

Heat pump ready

AmbiDuoClip Underfloor Heating System Overview

  • Heat Output Up to 100 W/m2
  • Designed for new-build solid floors
  • Flexible pipe layout
  • Quick and efficient installation

The AmbiDuoClip is a cost effective, hybrid solution that can be used where AmbiTak is the preferred option but the insulation board is either not deep enough to allow the pipe to be securely held with tacker clips alone or where the insulation is a PUR type board which lacks the required density to hold the clips in place.

In these situations, AmbiClip can be used in combination with AmbiTak. The clip rail is usually installed at double spacing and will provide a secure hold for the pipe, especially at loop-heads, while the tacker staples will help to minimise installation costs.

AmbiDuoClip Downloads and Ordering

Download icon

System Data Sheet

Download
Get a Quick Quote

Get a Quick Quote

Get a quote
Request a Sample

Request a Sample

Request Sample

AmbiDuoClip Specification

System Type Screeded

Sub Floor Solid

Pipe size (mm) 17 x 2 mm

Panel size (mm) N/A

Pipe Centres (mm) 100, 150, 200, 250

Minimum Build up excluding floor finish 45 mm plus insulation - Refer to screed supplier

Based on 0 tog, 45 degree MWT and 20 degree room temp output (W/m2) 122

Weight (kg/m2) 0.9 + weight of screed, insulation and reinforcing mesh

Acoustic Improvement (dB) N/A

Dependant on pipe centres max m2 per loop 24

Heat Pump Ready Yes


What’s included in the AmbiDuoClip system

Ambiente UFH Pipe White

17 mm UFH Pipe
6 linear metres per m2 of heated area
Code 41010

Ambiente Manifold

Manifold
Depends on heated area – normally approx 1 port per 20 m2 of heated area.
Code 41320

Ambiente Manifold Couplings

Manifold Couplings
For 17 mm Ambiente pipe
Code 42200

Ambiente Isolating Ball Valves

Isolating Ball Valves
1 pair (sold in pairs) per manifold
Code 42050

Manifold Tag
1 per manifold
Code 46755

Pumpset / Blender unit
1 per manifold
Code 41437

Ambiente Pipe Bends White

Pipe bends
2 per port (used to form a neat bend in the pipe beneath the manifold)
Code 41050

Orange Ambiente Edge Insulation

Border Edge Insulation
1 roll per 50 m2 of total floor area
Code 41621

Tacker Staples (40 mm / 60 mm)
1 box per 2 loops of UFH pipe
Code 41530 / 41550

Cliprail clips
1 cliprail per m2 of heated area
Code 41505