Suspended floor build up
Pipe centres every 50 mm
High output
Heat pump ready
AmbiClip (Biscuit Screed) Underfloor Heating System Overview
- Heat Output Up to 100 W/m2
- Designed for new-build or refurbishment projects
- Output of traditional screed system from joisted/battened floors
Biscuit screed underfloor heating systems provide an economical means of incorporating UFH into a property, while also offering excellent overall heat output. This system can be used on ground or upper floors, and involves laying a thin layer of screed over UFH pipework clipped to insulation, between battens.
It is only possible to get away with such a thin screed layer (as little as 25 mm) as it is not forming a structural slab – just used to fill in between the battens/joists. The only disadvantage of this system is that it does introduce a ‘wet’ trade in the screed, which can especially be challenging on upper floors.
AmbiClip (Biscuit Screed) Downloads and Ordering
AmbiClip (Biscuit Screed) Specification
System Type Screeded
Sub Floor Solid + Suspended
Pipe size (mm) 17x2mm
Panel size (mm) N/A
Pipe Centres (mm) 150, 200, 250
Minimum Build up excluding floor finish 0mm if within existing joist gap
Weight (kg/m2) 0.9 + weight of biscuit screed, insulation and any additional battening
Acoustic Improvement (dB) N/A
Dependant on pipe centres max m2 per loop 24
Heat Pump Ready Yes
What’s included in the AmbiClip (Biscuit Screed) system
17 mm UFH Pipe
6 linear metres per m2 of heated area
Code 41010
Manifold
For 17 mm Ambiente pipe
Code 42200
Manifold Couplings
For 17 mm Ambiente pipe
Code 42200
Isolating Ball Valves
1 pair (sold in pairs) per manifold
Code 42050
Manifold Tag
Code 46755
1 per manifold
Pumpset / Blender unit
Code 41437
1 per manifold
Pipe bends
2 per port (used to form a neat bend in the pipe beneath the manifold)
Code 41050
Border Edge Insulation
1 roll per 50 m2 of total floor area
Code 41620
Cliprails
1 cliprail per m2 of heated area
Code 41450
Cliprail Clips
Approx. 6 clips per m2 of heated area
Code 41505
