Structural floor
High output
Snail/serial pipe pattern
Heat pump ready
AmbiStructural Underfloor Heating System Overview
- Heat Output Up to 100 W/m2
- Designed for new-build solid floors
- Flexible pipe layout
- Quick and efficient installation
- Incorporates structural flooring mesh
The AmbiStructural system is used where UFH is required to be incorporated into a structural floor build up. Typical scenarios are airport hangars, car showrooms, where point loading can be extremely high. High density flooring insulation panels of the required specification are laid over the complete floor area which is overlaid with an A142 reinforcing mesh onto which the underfloor heating pipework is clipped or tied.
Pipework should be laid as per the designs supplied, with all pipework loops converging at the central manifold. This form of heating can also be used for driveway heating and other external applications. In these situations it is critical that the system is dosed with an anti-freeze mix to prevent damage to pipework in cold weather.
AmbiStructural Downloads and Ordering
AmbiStructural Specification
System Type Screeded
Sub Floor Solid
Pipe size (mm) 17x2mm
Panel size (mm) N/A
Pipe Centres (mm) 100, 150, 200, 250
Minimum Build up excluding floor finish 45mm plus insulation - Refer to structual engineer
Based on 0 tog, 45 degree MWT and 20 degree room temp output (W/m2) 122
Weight (kg/m2) 0.9 + weight of screed, insulation and reinforcing mesh
Acoustic Improvement (dB) N/A
Dependant on pipe centres max m2 per loop 24
Heat Pump Ready Yes
What’s included in the AmbiStructural system
17 mm UFH Pipe
6 linear metres per m2 of heated area
Code 41010
Manifold
Depends on heated area – normally approx 1 port per 20 m2 of heated area
Code 41320
Manifold Couplings
For 17 mm Ambiente pipe
Code 42200
Isolating Ball Valves
1 pair (sold in pairs) per manifold
Code 42050
Manifold Tag
1 per manifold
Code 46755
Pumpset / Blender unit
1 per manifold
Code 41437
Pipe bends
2 per port (used to form a neat bend in the pipe beneath the manifold)
Code 41050
Zip ties
Approx. 15 ties per m2 of heated area
Code 46750