Fits within existing floor void
Suitable for Joisted floors
Maximum heat transfer with plates
Depth of Insulation
AmbiPlate 30 Underfloor Heating System Overview
- Heat Output Up to 75 W/m2
- Designed for Joisted Floors
- No Impact on Floor Build Up
- Reflective Aluminium means maximum heat transfer
- Quick response time
The AmbiPlate 30 system is designed for use on joisted floor systems, typically for first floor applications. Before the system is installed, the joist void should be insulated – typically with a mineral wool type insulation, but also commonly with a ‘board’ type insulation supported by battens.
In both cases, it is important that the insulation layer is pushed up tight to the underside of the plates to maximise heat output and minimise downward loss.
The reflective properties of the aluminium diffuser plates mean that any heat is efficiently pushed up through the subfloor layers for maximum heat output. The nature of the system means that it has a quicker response that a traditional (screed) UFH system.
AmbiPlate 30 Downloads and Ordering
AmbiPlate 30 Specification
System Type Plated
Sub Floor Suspended
Pipe size (mm) 17x2mm
Panel size (mm) 390mm x 1000mm – 0.39m2 or 590mm x 1000mm – 0.59m2
Pipe Centres (mm) 150, 200
Minimum Build up excluding floor finish 0.5mm
Based on 0 tog, 45 degree MWT and 20 degree room temp output (W/m2) 76
Weight (kg/m2) 3.1
Acoustic Improvement (dB) N/A
Dependant on pipe centres max m2 per loop 24
Heat Pump Ready Yes
What’s included in the AmbiPlate 30 system
Manifold Couplings
For 17 mm Ambiente pipe
Code 42200
Isolating Ball Valves
1 pair (sold in pairs) per manifold
Code 42050
Manifold Tag
1 per manifold
Code 46755
Pumpset / Blender unit
1 per manifold
Code 41437
Pipe bends
2 per port (used to form a neat bend in the pipe beneath the manifold)
Code 41050
Aluminium diffuser Plate
Allow 2.2 plates per m2 of heated area
Code 44520
Clout Nails (25 mm)
Allow one bag per 50 m2 total area
Code 41501